Sample preparation,instrumental analysis,and natural distribution of complex organic pollutants in the wastewater from unconventional gas production

Large amounts of flowback and produced water (FPW) have been generated from hydraulic fracturing process for the production of unconventional gas such as shale gas. Complex organic pollutants are abundantly present in FPW with revealed toxicity to aquatic organisms and these contaminants may transfer into surrounding aquatic environment. Characterization and determination of complicated organic pollutants in FPW remains a challenge due to its complex composition and high salinity matrix. This review article covers the progress of recent 5 years regarding the sample preparation and instrumental analysis methods and thus summarizes the advantages and disadvantages of these methods for critical analysis of organic contaminants in FPW samples. Furthermore, the natural distribution of detected organic compounds and their transformation were reviewed and discussed to enhance the understanding of spatial and temporal behaviors of these organic pollutants in natural environment, paving the way for future development of pollution control policies and strategies. Enlightened by the studies of FPW contamination in the US, the investigations of FPW contamination in China continued to grow due to rapidly growing production of shale gas in China and resulted pollution.     

Recent trends in capillary and micro-chip electrophoretic instrumentation for field-analysis

Technical advances in the development of field-deployable capillary and microchip electrophoretic instruments and reports of their deployment between 2013 and 2017 were reviewed. Strategies and considerations in the design of the injection, separation and detection hardware, chemistry and associated infrastructure were discussed from an in-field perspective, with portability, robustness and automation/“ease of use” featuring as key requirements. Integration of functionality is important for adequate in-field performance. Progress was made towards the use of multiple channel devices for increased throughput and/or resolving power, mixing devices for on-line/in-line sample derivatization, battery operation and temperature control. The strengths and weaknesses of the various approaches described in the literature are discussed from the perspective of in-field operation. An overview of the applications of the field electrophoretic instruments is provided, including environmental science and planetary investigation.     

Determination of sulfa antibiotic residues in river and particulate matter by field-amplified sample injection-capillary zone electrophoresis

In the present research, field-amplified sample injection–CZE (FASI–CZE) coupled with a diode array detector was established to determine trace level sulfa antibiotic. Sulfathiazole, sulfadiazine, sulfamethazine, sulfadimethoxine, sulfamethoxazole, and sulfisoxazole were selected as analytes for the experiments. The background electrolyte solution consisted of 70.0 mmol/L borax and 60.0 mmol/L boric acid (including 10% methanol, pH 9.1). The plug was 2.5 mmol/L borax, which was injected into the capillary at a pressure of 0.5 psi for 5 s. Then the sample was injected into the capillary at an injection voltage of –10 kV for 20 s. The electrophoretic separation was carried out under a voltage of +19 kV. The capillary temperature was maintained at 20˚C throughout the analysis, and six sulfonamides were completely separated within 35 min. Compared with pressure injection-CZE, the sensitivity of FASI-CZE was increased by 6.25–10.0 times, and the LODs were reduced from 0.2–0.5 to 0.02–0.05 μg/mL. The method was applied to the determination of sulfonamides in river water and particulate matter samples. The recoveries were 78.59–106.59%. The intraday and interday precisions were 2.89–7.35% and 2.77–7.09%, respectively. This provides a simpler and faster method for the analysis of sulfa antibiotic residues in environmental samples.     

Current air quality analytics and monitoring: A review

This review summarizes the different tools and concepts that are commonly applied in air quality monitoring. The monitoring of atmosphere is extremely important as the air quality is an important problem for large communities. Main requirements for analytical devices used for monitoring include a long period of autonomic operation and portability. These instruments, however, are often characterized by poor analytical performance. Monitoring networks are the most common tools used for monitoring, so large-scale monitoring programmes are summarized here. Biomonitoring, as a cheap and convenient alternative to traditional sample collection, is becoming more and more popular, although its main drawback is the lack of standard procedures. Telemonitoring is another approach to air monitoring, which offers some interesting opportunities, such as ease of coverage of large or remote areas, constituting a complementary approach to traditional strategies; however, it requires huge costs.     

Development and validation of a liquid chromatography–tandem mass spectrometry method for the simultaneous analysis of androgens,estrogens, glucocorticoids and progestagens in human serum

We present a liquid chromatography tandem mass spectrometry method for the simultaneous analysis of 16 endogenous steroids (androgens, estrogens, glucocorticoids and progestogens) in human serum. Samples (250 μl of matrix) were extracted with t-butylmethyl ether prior to LC–MS/MS analysis. The chromatographic separation was achieved on a reversed-phase column using a methanol–water gradient. The HPLC was coupled to a triple quadrupole mass spectrometer equipped with an electrospray ionization source with acquisition in multiple reaction monitoring mode. The method was validated using surrogate matrices and human serum samples. The specificity of the method was confirmed for all of the considered steroids; linearity was also assessed (R² > 0.99, lack-of-fit test) in the ranges of concentrations investigated. The lower limits of quantification were in the range 10–400 pg/ml depending on the target steroid. Accuracy was in the range 85–115% for all target steroids except for the lower limit of quantitation levels where it was 80–120%. The extraction recovery was always >65%. No significant matrix effects were observed. To test the reliability of the method, the analysis of serum samples collected from 10 healthy subjects (5 M/5F) was performed. The present method can be used to identify the trajectories of deviation from the concentration normality ranges applied to disorders of the gonadal and adrenal axes.     

Zeolitic imidazolate framework-67 (ZIF-67) rhombic dodecahedrons as full-spectrum light harvesting photocatalyst for environmental remediation

The inferior utilization efficiency of light is the main obstacle to the practical application of traditional photocatalysts such as TiO₂ and ZnO. In this regard, the development of novel photocatalysts with the capability of harvesting full spectrum light (from ultraviolet (UV) to near-infrared (NIR)) energy is a promising solution for solar energy conversion and environmental remediation. Here, we report the discovery of a single material that can harvest UV, visible (VIS), and NIR radiations to decompose heavy metal contaminants in aqueous solution. Zeolitic imidazolate framework-67 (ZIF-67) rhombic dodecahedrons were synthesized through a facile solution approach and employed in the reduction of Cr(VI) under UV−VIS−NIR pulsed laser irradiation, which was generated from the fundamental, second and third harmonics of Nd:YAG laser, respectively. The nanostructures showed efficient Cr(VI) reduction under UV, VIS and NIR laser irradiation and the measured reduction efficiency (%) was 71.22%, 69.52%, and 40.79%, respectively after 120 min. A possible explanation for the photocatalytic activity in Cr(VI) reduction was proposed. This is the first study of its kind where pulsed laser and ZIF-67 rhombic dodecahedrons capable of harvesting full spectrum light energy have been employed for the removal of Cr(VI) from water. The extraordinary capacity of harvesting full-spectrum light and long-term stability make ZIF-67 a potential photocatalyst for environmental remediation.     

Sustainable alternative in environmental monitoring using carbon nanoparticles as optical probes

Environmental monitoring is getting more important nowadays due to the greater stress faced by the natural environment in the era of urbanisation and industrialisation. To accomplish the task, rapid and reliable analytical probes are essentially needed to perform the monitoring at real time basis with high sensitivity and accuracy. In view of this, analytical probes developed using carbon nanoparticles are one of the latest alternatives that are proven with capability to detect various analytes of the environment. Carbon nanoparticles portray good fluorescence property that enables the integration onto optical sensing transducers. Further engineering via surface functionalization can be performed in the interest to improve the selectivity and sensitivity of the probes. There are several advantages of using carbon nanoparticles and the most significant benefit is the sustainability prospect as compared to other groups of fluorophores. Carbon nanoparticles can be synthesised with greener approach via simple pyrolysis or hydrolysis processes that involve minimum use of toxic or harmful starting precursors, besides able to tap on using renewable resources such as carbon rich agricultural wastes. The synthesis is often performed under mild condition and produces less or no side chemical products. Carbon nanoparticles by nature show low toxicity effect to the environment. This review focuses specifically of the sustainable significances, advantages and achievements in adopting carbon nanoparticles as an alternative for environmental monitoring.     

Dithiocarbamates as hazardous remediation agent: A critical review on progress in environmental chemistry for inorganic species studies of 20th century

This article provides a critical review and a wide range of applications of dithiocarbamates (DTCs) in environmental samples. The characteristics of DTCs are reviewed with particular emphasis on inorganic speciation studies using state-of-the-art analytical instrumentation coupled with computational methods of analysis.     

Magnetic mixed hemimicelles solid‐phase extraction coupled with high‐performance liquid chromatography for the extraction and rapid determination of six fluoroquinolones in environmental water samples

In this study, a mixed hemimicelle solid‐phase extraction method based on Fe₃O₄ nanoparticles coated with sodium dodecyl sulfate was applied for the preconcentration and fast isolation of six fluoroquinolones in environmental water samples before high‐performance liquid chromatography determination. The main factors affecting the extraction efficiency of the analytes, such as amount of surfactant, amount of Fe₃O₄ nanoparticles, extraction time, sample volume, sample pH, ionic strength, and desorption conditions, were investigated and optimized. The method has detection limits from 0.05 to 0.1 ng/mL and good linearity (r ≥ 09948) in the range 0.1–200 ng/mL depending on the fluoroquinolone. The enrichment factor is ～200. The recoveries (at spiked levels of 1, 5, and 50 ng/mL) are in the range of 79–120%.